Strut and Rudder Bearing specifications for Marinette aluminum boats General: All shaft bearings used on Marinettes are to have Non-Metallic sleeves. Bearings with Bronze or Brass sleeves should not be used. Strut Bearings: For 1" Shafts- Bearing size = 1" ID x 1-1/2" OD x 4" Long For 1-1/4" Shafts - Bearing size = 1-1/4" ID x 2" OD x 5" Long For 1-3/8" Shafts - Bearing size = 1-3/8" ID x 2" OD x 5-1/2" Long Rudder Bearings For 1" Shafts - Bearing Size = 1" ID x 1-1/2" OD x 2" Long (2 are required per rudder shaft, one at the top of the rudder log and one at the bottom.) These are made by cutting a 4" bearing in half.

Copyright © 1999-2004 Marinette Yachts Inc. All rights reserved.
P.O. Box 67, Marquette, MI 49855
Phone/Fax: 906-78-YACHT  - -  Email: info@marinette.com